T+A Elektroakustik K8, Руководство пользователя

Страница: 10 / 46

10
Screen symbols and their meaning
Making connection (Wait / Busy)
The rotating symbol indicates that the K8 is either processing a command or
making the connection to a service. These processes may take some time,
depending on the speed of the network and the load on it.
During such periods the
K8 may be muted, and may not respond to commands.
If this should occur, please wait until the symbol disappears again.
Indicates a playable music track or a playlist.
Indicates a folder , which contains further folders or lists.
Indicates that a source is being played through a cable connection .
Indicates that a source is being played through a radio connection .
Indicates that the K8 is playing a station or a music track
Indicates a pause
Buffer display (fullness / memory indicator) and
data rate indicator (where available):
the higher the data rate, the higher the playback quality.
Elapsed playback time indicator.
This display is not available for all services.
Indicates that the  button can be used to shift to a higher menu level or
Select level.
0 / 0 Position indicator in Select lists: the first number states the current position in the
list, the second number the total number of list entries (length of list).
Indicates that the selected menu point or list point can be activated by pressing
the
 button.
ABC or
123 or
abc
Character input mode indicator

Lights up when Zone 2 is active (not possible with 7.1 system in the main room)

Lights up when Zone 3 is active (not possible with 7.1 or 5.1 system in the main
room)

Lights up when Zone 4 is active

Repeat function active, Streaming Client and iPod only

Shuffle function active (random playback) , Streaming Client and iPod only

This LED lights up when the Dolby volume function is switched on

The alarm timer is active, the K8 will switch itself on at the set time.

Playback of a dts audio programme

Playback of a Dolby audio programme
HD Playback of a high-definition (HD) audio programme

Headphone mode (loudspeakers switched off)
F Front speakers switched on
C Centre speaker switched on
S Surround speakers switched on
B Rear speakers (Back) switched on
SW Sub-woofer switched on
    If there is no audible signal on one or more loudspeaker channels, even though
these speakers are switched on, the reason may be that these channels are not
present on the recording being played.