5.
The display will clear, but the arrow will continue to flash at the selected symbol.
To return to review mode at any time press the
‘tuning’ button
until the
review mode appears.
4.4.2. Setting the Time and Day (CSC 5352 only)
The day, hours and minutes are programmed as follows:
1.
Enter Quick Set Mode as previously described.
2.
Begin by obtaining the Clock symbol in the normal way, then press the
‘
enter’ button
. The number on the far left of the display will flash, this is the day
number.
3.
Use the
and
buttons
to select the day number (1 to 7) with 1
representing Monday and 7 representing Sunday. If you decide not to change
the value at any stage press the
“tuning” button
instead.
4.
Press the
enter’ button
to enter the day number and the hours will flash.
The and
buttons
will allow the hour to be set.
5.
Press the ‘
enter’ button
to enter the hour and the minutes will flash. The
and
buttons
will allow the minutes to be set.
6.
Press the
‘enter’ button
and the display will return to the Quick Set mode
and the time and day will be set.
To return to review mode at any time press
the ‘tuning’ button.
4.5. OVERLAY CARD PRINTING, FINE TUNE MODE ONLY
Fine Tune Card Settings for the CSC 5352
Fine Tune Card Settings for the CSC 5252
Fig.14
October, 03
CSC USER GUIDE
26 of 42
Содержание Satchwell Climatronic CSC5252
Страница 1: ...Satchwell Climatronic CSC5252 CSC5352 Compensator User s Guide SatchwellTM...
Страница 41: ...CSC USER GUIDE October 03 41 of 42...
Страница 42: ...February 08 CSC USER GUIDE 42 of 42 S317856100_A5...
Страница 43: ......
