ShenZhen Comark Technology Co.,Ltd.
Serial Server and Gateway User Manual
Page 6
2 Serial Port Configuration
Before making this device configuration, make sure that the necessary software is installed on your computer
and that the network is properly configured.
The minimum configuration requirements for a user's computer are as follows:
◆
Installing the operating system (such as Windows XP/2000, etc.)
◆
Installing Ethernet Card
◆
Installing Web browsers (IE6.0 and above)
◆
Install and start the TCP/IP protocol
2.1 N
etwork Visit
Device Default IP address is: 192.168.1.253, subnet mask: 255.255.255.0. When accessing devices through
the Web, the IP of the device and computer must be in the same local domain network. You can access the Web
configuration interface for a device using a standard Web browser such as Internet Explorer (ie browser).Before
you access the device through a Web browser, the device's Ethernet port is connected to your LAN or directly to
your PC network.
Step 1: pen IE browser on PC.
Step 2: Enter the IP address in the address bar of the IE browser, such as "192.168.1.199", press the
"enter" key.
Step 3: Enter the username and password in the pop-up dialog box. (username admin, password 123)
Click OK to enter the device Web configuration interface.
