ShenZhen Comark Technology Co.,Ltd.
Serial Server and Gateway User Manual
Page 37
In the TFTP settings shown in the following figure.
Step 1:
In the navigation on the left side, select "manage settings" and enter the TFTP firmware upgrade
page.
Step 2:
Sets the IP address of the TFTP server and the name of the upgrade software.
Step 3:
Click the "upgrade", a software upgrade.
Description:
Upgrade may take several minutes, do not disconnect the power during the upgrade process, or other settings.
Step 4:
System automatically reboot after the upgrade is complete.
------End
Management Sets The Button Description
Button Value
Value Range
Description
save
Save the configuration data for the current user (power
failure invalid configuration information).
save&reboot
-
Save the current configuration data and restart the
device by the user.
reboot
-
Do not save the current configuration data to restart the
device by the user.
factory
-
Restore serial port data all data from the system to the
factory settings.
