SyxthSense Ltd
Copyright © 2021 SyxthSense Ltd. All rights reserved - 03/2021
PS
MOD3.102
- 5/29
Online store:
www.syxthsense.com
Enquiries: T:
0844 840 3100
E:
Measurement Displays
The SRI room interfaces can show up to 3 temperatures (sensor 1, sensor 2, sensor 3) in the ACTION
CIRCLE. With the RH humidity sensor option, the relative humidity sensor is also displayed in the
ACTION CIRCLE. With CO2 option, the CO2 reading can be displayed in the ACTION CIRCLE.
Outside
20
.1
°C
Sensor 1 can display the external sensor RI1 temperature, or temperature can be
set over the network (if
Sensor1 Source
has been set to network). The description
for the temperature can be changed via
Sensor1 Text
parameter in the
configuration pages. By setting the description to
Disabled
, the sensor reading is
not displayed on the screen.
Floor
20
.1
°C
Sensor 2 can display the external sensor RI2 temperature, or temperature can be
set over the network (if
Sensor2 Source
has been set to network). The description
for the temperature can be changed via
Sensor2 Text
parameter in the
configuration pages. By setting the description to
Disabled
, the sensor reading is
not displayed on the screen.
Room
20
.1
°C
Sensor 3 can display the built-in sensor temperature, or temperature can be set
over the network (if
Sensor3 Source
has been set to network). The description for
the temperature can be changed via
Sensor3 Text
parameter in the configuration
pages. By setting the description to
Disabled
, the sensor reading is not displayed
on the screen.
Note: If all sensor displays are
Disabled,
the ACTION CIRCLE displays the last drawn image.
Setpoint Mode
Inside the large circle on the HOME SCREEN the SRI70/71 shows the target setpoint value. As
default the units are in temperature (Celcius / Fahrenheit). It is possible to change the units to
’percentage’ to display the target values for percentage based control, or to show temperature only.
Setpoint Mode Options:-
•
TEMPERATURE; setpoint in displayed in temperature (Celsius / Fahrenheit).
•
PERCENTAGE; setpoint is displayed in percentage
•
NONE; no setpoint is displayed. Instead of setpoint the Sensor 3 is displayed inside the circle. If
no other measurement is not displayed the ACTION CIRCLE change to the COG WHEEL icon to
indicate access to FURTHER SETTINGS screen.
•
TEMPERATURE RELATIVE; only +/- element of the setpoint is displayed (Note: Set
Control Set-
tings / Setpolnt Limit Mode
= Relative)
•
STATE SELECT; setpoint is changed in integers, and at minimum/maximum levels Min/Max is
showed next to the setpoint.
.0
Room
SETPOINT UNIT: TEMPERATURE
18
.5
°C
Room
22
.7
°C
25
%
SETPOINT UNIT: PERCENTAGE
22
.7
°C
SETPOINT UNIT: NONE
18
.3
°C
Room
SETPOINT UNIT: TEMPERATURE REL.
2
.5
°C
Room
22
.7
°C
+
SETPOINT MODE: STATE SELECT
0
Min
SETPOINT MODE: STATE SELECT
7
Max
Target Setpoint
Using the arrows up & down the target setpoint can be adjusted. The minimum and maximum user
setpoints are configured in the Maintenance mode. With BAC/MOD models the current setpoint is
available over the communication network.