SYSTRONIK MULTILYZER STe, Инструкция по эксплуатации

Страница: 31 / 77

MULTILYZER
®
ST/STe 31

Print measurement record (measured values stored with HOLD)
Measured values in HOLD mode can be checked prior to printing. It
is also possible to print values recorded in HOLD mode at a later
point of time.
As soon as the print command is chosen, the record is printed paral-
lel to the measuring task (

multitasking function), i.e. the meas-
urement mode remains active.

Start Corestream search.
Small changes in temperature in the combustion air will be shown in
form of bars. For constant temperature no bar is visible. The function
„Corestream“ is only available in the program „Fluegas“ and for the
measurement of the combustion air temperature.

Perform draft measurement (Optional)
To determine the zero point (= initial value in relation to the ambient
air pressure), the air hose (with the blue connector) must be un-
plugged before each draft measurement. After this, the zero point