SYSTRONIK MULTILYZER STe, Инструкция по эксплуатации

Страница: 30 / 77

30 MULTILYZER
®
ST/STe
6.3 Fluegas measurement program

Start the "Fluegas" program.
(menu color: green)
After a cold start the calibration phase takes 30 seconds.
After calibration the last fuel used is selected by default and dis-
played for confirmation with the “Enter-Button”, another fuel can be
selected with the navigation buttons and can be confirmed with the
“Enter-Button”.

Switch gas pump off or back on.
When the gas pump is switched off, the pump symbol is no longer
shown in the status bar. Changes in the corresponding measured
gas values cannot be ruled out, e.g. the O2 value may change as a
result of lack of oxygen in the gas lines inside the device. If the gas
pump remains off for a longer period of time, calibration in fresh air
should be carried out before a new measurement is made.