SySTIUM
®
TECHNOLOGIES
MODEL 133i
Copyright © 2013, Systium® Technologies, LLC
PN: 91601-00 Rev 01
Attaching Top and Bottom Plates
1. Position the linking tabs from the top plate through the
bottom plate. Attach the following cables:
a. SATA I/O cable (s)
b. SATA power cable (s)
2. Dress Cables as shown in Figure 10.
3. Carefully close the top and bottom halves taking care
not to crush any cables.
4. Attach the top and bottom halves together with the three
(3) screws removed during disassembly.
Power up the System
1. Attach the North American AC Power cord as shown in
Figure 12.
2. Attach peripherals needed to operate the computer
system.
3. Turn on the computer by pressing the power switch on
the rear panel. Refer to the Quick Start Section of this
manual for more information.
4. Test the complete operation of the computer using a
known good computer functional test program
5. . Install any required operating system or application
software.
6. Disconnect the computer from the peripherals used
during the testing phase. Package the computer using
the original packaging.
NOTE:
You must include the End User Quick Start manual in the
shipment to the customer to maintain Regulatory
Compliance.
FIGURE 10
FIGURE 11
FIGURE 12
