SySTIUM
®
TECHNOLOGIES
MODEL 133i
Copyright © 2013, Systium® Technologies, LLC
PN: 91601-00 Rev 01
Intel DQ67EP Diagram
Installing HDD(s)
1. Install insulating HDD bumpers as shown in Figure 8.
Position the HDD bumpers over the HDD screw holes.
The HDD bumpers have a centering hole punched
through them. There is adhesive on the back. Align the
bumpers over the holes and press down to install.
2. a. If using a single drive - Install
the 2.5” HDD over the
insulating bumpers using the four (4) supplied M3 x 5
mounting screws as shown in Figure 9a
b. If using two drives - Install the second
2.5” HDDs over
the insulating bumpers using the four (4) supplied M3 x
5 mounting screws.
FIGURE 7a
FIGURE 9a
FIGURE 8
FIGURE 7c
FIGURE 7b
