Systemline SN6210 S7, Инструкция по эксплуатации

Страница: 9 / 24

9
6.2 Wiring Diagram with Keypad (without DigiLink)
7.0 NetLink Setup - First Steps Connections
1. Insert (RJ45) LAN connection from network switch/router.
2. Insert audio connection to AV amplifier (Digital coax preferred) make a note of which input
you have used on the AV Receiver, requires a digital audio cable not supplied.
3. Connect RS232 cable from NetLink to AV Amplifier/Receiver (recommended).
4. Connect up power.
5. Wait for standby light to go solid – 15-20 seconds.