Systemline SN6210 S7, Инструкция по эксплуатации

Страница: 14 / 24

14
If it finds an S7 server with these host names, it will make a TCP/IP connection and you will
see the IP address in a green box
If the server is unavailable or switched off, the box will turn red:
NetLink will attempt to connect back to the server.
If you wish to use NetLink with another non Systemline Logitech Media Server (LMS), then
you can uncheck the ‘Get Server IP Automatically?’ box and manually enter the IP address of
the LMS. NetLink will then operate with the manually added LMS.
5.
Source MAC LAN:
This displays the MAC address of NetLink which will also be the software
player MAC when the server connection is LAN mode
6. Source MAC DigiLink: This will display the software player MAC address as allocated by the
server when a DigiLink is plugged in. NetLink will obtain this MAC address automatically
when DigiLink is plugged in.
7. USB Serial: This displays the unique USB serial number of a connected DigiLink
9.4 Connected Amplifier
1. Amplifier Type: You can select the AVR or Power Amplifier mode here from the drop down
list:
S7 NetPower – Use this mode with the Systemline 7 NetPower amplifier, or any other power
amplifier or non-supported AVR. The analogue outputs will be variable with volume control;
the digital outputs will be fixed. You can use the 12v trigger to switch on the power amplifier.
Arcam
– Supported models are AVR380/390/450/550/750/850/AV860/SR250
Denon AVR-X Marantz AV/SR/NR – Denon and Marantz use the same control protocol.
There are many models and so a definitive list cannot be produced. NetLink is tested using
Denon AVR-X3200W, Marantz SR5009 and Marantz SR5010
Onkyo
– There are many models available, so a definitive list cannot be produced, it is tested
with TX-NR656
Yamaha
– Many models are available, NetLink is tested with RX-V677