SystemAir VK sileo, Инструкция по установке и эксплуатации

Страница: 32 / 44

32
|
6. Installation
6.1 Safety information
»
Installation may only be carried out by trained, qualified personnel.
»
Comply with the system-related conditions and the requirements of the system manufacturer or plant
builder.
» Safety elements, e.g. protective grilles, may not be dismantled, bypassed or put out of function.
Danger of impact from falling fan or parts of the fan!
» Check the surface before installation for load-bearing capacity.
»
When selecting the hoisting equipment and fi tting material, observe the weight, tendency to vibrate
and shear forces (weight information on the name plate).
»
Wear a helmet and protective goggles.
6.2 Installation conditions
» Provide contact and intake protection and ensure safety distances according to DIN EN ISO13857 and
DIN24167-1.
»
Ensure that there is enough space for the installation of the fan.
»
Protect against dust and wetness when installing.
6.3 Instructions for installation
»
Install the fan in such a way that no vibrations are transmitted to the channel system or the housing
frame.
»
Ensure that the fan is installed firmly and stably
»
Ensure secure access to the fan for maintenance and repair.
» Ensure uninhibited and constant inflow into the appliance and free exhaust.
» Installation in outdoor area only with weather roof from our accessory programm.
NOTE
»
To avoid damages on the bearings of the fan, it has to be warranted, that the air is
able to enter and escape the fan nontwisting and smoothly.
» Only if the air is able to enter and escape the fan nontwisting and smoothly the
stated power is reachable.
»
Directly before and after the fan you have to install straight ducts. Regarding duct
installation, please pay attention to the following figure (fig. 4).
min.
2,5x ØDN
min.
2,5x ØDN
ØDN
fig 4: installation