4 Commisioning
4.1 Before Starting the System
When the installation is finished, check that:
• The unit is installed in accordance with these instructions
• The unit is correctly wired
• Sound attenuators are installed and that the duct system is correctly connected to the unit
• Outdoor air intake is positioned with sufficient distance to pollution sources (kitchen ventilator exhaust,
central vacuum system exhaust or similar)
• All external equipment are connected
• The following data is available:
• Intended configuration, for example temperature control functions, fan control, external control
functions etc.
• How the unit is supposed to operate according to a weekly schedule (normal and reduced speed)
4.2 Initial Configuration
There are four things to consider when starting up the system:
• Language setup
• Control temperature
• Weekly schedule
• Type of function
All these can be set during start up.
1 Setting Language
Press the OK button while switching on the mains
supply.
Then press the OK button again after which
the cursor appears. Choose language with the
UP/DOWN buttons. Confirm the choice with the
OK button after which the cursor disappears. Press
the LEFT button to go back in the menus.
The language can also be change in the
Language
menu, see the control unit manual.
2 Setting Control Temperature
Set control temperature by choosing
Control
temp.
and edit the value to the desired
temperature.
The value can be between 16°C and 30°C.
3 Setting Weekly Schedule
Set the time and date by choosing
Time/Date
and edit the values to valid time and date.
Topvex FR03, FR06, FR08, and FR11
Operation and Maintenance Instructions
206575
7
Systemair AB
