SystemAir SYS WSC 86 Скачать руководство пользователя страница 4

Страница: 4 / 44

Installation

1. Safety Precautions

Please read these Safety Precautions carefully before installing the wired controller.



This manual classifies the precautions into WARNING and CAUTION. They both contain

important information regarding safety. Be sure to follow all the precautions below.



After completing the installation, conduct a trial operation to check for faults and explain to

the customer how to operate the controller with the aid of the operation manual. Ask the

customer to store the installation manual along with the operation manual for future

reference.

Ask your dealer or qualified personnel to carry out installation work.

Do not attempt to install the wired controller yourself. Improper installation may result in

leakage, electric shocks or fire.

Consult your local dealer regarding relocation and reinstallation of the wired controller.

Improper installation work may result in leakage, electric shocks or fire hazards.

Install the wired controller in accordance with the instructions in this manual.

Improper installation may result in water leakage, electric shocks or fire.

Failure to follow these instructions properly may result in personal

injury or loss of life.
Failure to observe these instructions properly may result in property

damage or personal injury, which may be serious depending on the

circumstances.

Identifier

Meaning

Warning

Caution

Warning

●

●
●

Important

Indicates a useful hint or additional information.

Содержание SYS WSC 86













































Результаты поиска

Содержание SYS WSC 86

Отзывы:

Похожие инструкции для SYS WSC 86

Бренды по названию

Популярные бренды

SystemAir SYS WSC 86, Инструкция по установке и эксплуатации

Результаты поиска

Содержание SYS WSC 86

Отзывы:

Похожие инструкции для SYS WSC 86

Бренды по названию

Популярные бренды