SystemAir SRC, Инструкция по установке и эксплуатации

Страница: 11 / 34

8
Active mode back light
2
Sleep mode back light
10 min
Sleep mode timeout
Display settings
1 ... 60
min 10
OK Cancel
Sleep mode timeout
Sleep mode timeout
Display settings
2
1
2
OK Cancel
Sleep mode back light
Sleep mode timeout
Display settings
2
1
8
OK Cancel
Active mode back light
Sleep mode timeout
Display settings
2
1
Display settings
HMI termination
None
Clock sync. source
Example 13.00
Use 24 hours time format
05.02.2020 13:35:20
Unit date and time
English
Unit language
System preferences
Display settings
HMI termination
Chiller B, Address 2
Clock sync. source
Example 13.00
Use 24 hours time format
05.02.2020 13:35:20
Unit date and time
English
Unit language
System preferences
Display settings
HMI termination
Chiller B, Address 2
Clock sync. source
Example 13.00
Use 24 hours time format
05.02.2020 13:35:20
Unit date and time
English
Unit language
System preferences
Information
Setting “0” for standby brightness turns off the SRC screen. Simply tapping on the screen brings the
SRC out of this mode.
9 SRC
4.2. DISPLAY SETTING
This menu allows you to manage the screen brightness when it is active or in
standby mode. It is also possible to set the standby time.
4.3. INTERFACE RESISTOR
The SRC is equipped with a 120 ohm terminating resistor. By default, the end of line resistor is activated. It
can be deactivated directly via the “Preferences” screen.