5
The display
shows
1.
2.
3.
6.
1.
2.
3.
4.
5.
6.
The display is lit up
Temperature
The system is configured to control a
certain temperature. The actual value and
set point for this temperature is shown.
Access code 1111 may be necessary.
Set point temperatures for outdoor tempe-
rature compensation are shown. The control
curve is defined with 8 node points. Only 2 or
3 node points are shown in the display, and
the remaining node points are displayed by
scrolling
and
.
Temperatur
To return to the start menu at once
– press and
several times.
Select and confirm new set point tempera-
ture.
The system will automatically return to the
start menu after some minutes.
x 1
x 2
x 1
x 1
x 1
x 2
4.
5.
Setting of temperature
Value to be changed flashes.
Value to be changed flashes.
Select one new set point temperature
for each outdoor temperature shown on
the curve and confirm selected value with
OK.The system will automatically return to
the start menu after some minutes.
Act: xx.x ˚C
Setp
Setp: yy.y ˚C
Setp: yy.y ˚C
Outdoor comp Setp.
xx ˚C = zz.z ˚C
yy ˚C = vv.v ˚C
Outdoor comp. Setp
xx ˚C = zz.z. ˚C
yy ˚C = vv.v ˚C
Unit
Date, time
Syst: Running mode (Auto, Ma-
nual reduced, Man. norm., Off)
To return to the start menu at once
– press and
several times.
Modification of outdoor compensated supply temperature
Follow the steps
below
