11
Digit to be changed flashes. Factory logged
password, exclusively for service partners.
The display
shows
1.
2.
3.
4.
8.
9.
13.
10.
11.
12.
The display is lit up
Access rights
Select Log on
Return to start menu
Settings
Menus in settings
Select:
– Restore factory settings: Yes/No
– Restore user settings: Yes/No
Confirm with OK for selected alternative.
Values to be changed flashes.
To select menu:
– Save user setings: Yes/No
Value to be changed flashes.
Confirm selected value with OK.
Select and confirm new setpoint.
The system is now logged on at the Admin level
and unskilled persons could change important
parameters and settings to values that will
cause malfunction of the system. Go to the start
menu to return the system immediatlely to the
lowest access level – Operator
System returns to the start menu and is
now logged on at the Operator-level.
Select - Log off and select the answer – Yes
Access rights
Save user settings: No
14.
15.
16.
x 5
x 2
x 1
x 1
x 2
x 1
x 3
x 1
x 2
6.
7.
Restore Systemair factory settings or latest user parameters and settings
x 2
x 2
5.
Unit
Date, time
Syst: Running mode (Auto, Ma-
nual reduced, Man. norm., Off)
Log on
Log off
Change password
Log off?
No
Actual level: Admin
Log on
Enter password ****
Actual level:
Operator
Actual level:
Admin
Running mode
Temperature
...
Access rights
Control temp
Control flow
Alarm settings
Restore factory settings: No
Restore user settings: No
Access to this menu requires log on at the high-authority level – ”Admin”.
Follow the steps
below
