SystemAir Danvent DV, Приложение к руководству пользователя

Страница: 30 / 76

Annex 9—2
The factory sets the positions of the 4 DIP switch levers for the maximum of 20 revolutions per minute
for sorption exchangers. The position of each DIP switch lever is shown below.
DV Diameter of
pulley
DIP switch position Motor
10 50 1000 90TYD ‐ S214 ‐ M 2.8Nm
15 87
0100
120TYD ‐ S214 ‐ M 5.5Nm
20 87
25 107
30 107
40 107
1100
50 118
60 118
80 140 1010
120TYD ‐ S214 ‐ L 7.5Nm
100 150
120 150
0110 150 160
190 160
240 160
9.1.2 Indication of operation mode via red and green LED as well as test of motor
The LED is in the cover of the cabinet.
LED indication Value
No indication Power off
Green Ordinary operation
Green – flashes Ready for operation
Constant green and red indication for activated rotor
guard
Magnet on the rotor has activated rotor guard
Constant green and fast red flashes Restart sequence active
Red Rotor guard has not been activated
Number of red flashes in series Value
1 Output current limit
2 Over voltage
3 Under voltage
4 Failure in the controller
5 Communication failure