INSTALLATION
The cooker hood is intended for installation
built into cupboards. The cooker hood is
equipped with a motorised damper, LED
lamps and metal mesh filter. Installation,
care, maintenance etc., are described in
these instructions.
TECHNICAL INFORMATION
Fig. 1
Measurements
see Fig. 1
Electrical
installation
230 V ~ earthed.
Lighting
LED 2 x 2 W
Max. connection
output for control
cable
900 W at 230 V~
INSTALLATION
Fixing parts, screws for mounting, etc. are
supplied with the cooker hood.
Electrical installation
The cooker hood is supplied with an electri-
cal cable and earthed plug for connection
to an earthed wall socket as well as a con-
trol cable for connection to an external unit
or units. The junction box and wall socket
must be accessible after installation is
complete.
Replacement of damper hatch
N.B.
Only applicable where basic ventilation
takes place via the cooker hood.
The cooker hood is fitted with a sealed
damper. If the cooker hood is used in a kit-
chen that does not have separate basic
flow ventilation, it must be fitted with an ad-
justment hatch for basic flow. Replace the
damper hatch before installing the cooker
hood, see separate instructions
Installing the damper.
Fig. 2
A duct connector with damper is provided
inside the hood.
Position the damper axle "A" in the loop un-
der the damper lid; see Fig. 2. Ensure that
the clips "B" engage under the edge of the
plate. Press the connector into position un-
til the snap locks is fixed.
16
/126205/2016-04-18
Содержание 382-10/B
