Systech Corporation IPG-7700 Series, Руководство по оборудованию

Страница: 8 / 19

Planning the installation 8
IPG Panel Connectors
The following figures show the connectors and LED locations for the IPG models. There are:
•
zero, or one DB-25 female serial port
•
zero, or one RJ-11 telephone (terminal) port
•
one cellular antenna connector
•
one Ethernet port
IPG Front Panel Connectors
IPG Rear Panel Connectors
The Unit Status LED indicates the overall status of the device. The Port Status LEDs indicate
the status of the serial or terminal port. The Cellular LED and the Signal Strength LEDs
indicate the status of the Cellular interface. The LAN LED indicates the status of the
Ethernet connection. For information on interpreting the LED color and pattern displays, see
Troubleshooting .
The reset button can be used to reboot the unit or to restore the factory default configuration
on the unit. Depressing and releasing the button will reboot the unit.
Depressing and holding the "Reset" button in for about 5 seconds will restore the default
(factory) configuration to the unit and then reboot the unit.