Protouch-wide: user documentation
DOC/PROTOUCH-WIDE; V1.5
DOC_PROTOUCH_WIDE_V1.5.docx
Seite 7 von 41
© 2019 Syslogic Datentechnik AG | All rights reserved
1.6
Items delivered
1.6.1
Built-in version
-
1x TFT/HB101PUxyyy-zZZZ
-
1x Fixing Frame with M3x6 and M3x8 securing screws
-
1x Power supply connector Weidmüller BCZ 3.81/04/180F SN SW (1792970000)
1.6.2
VESA mount version
-
1x TFT/HV101PUxyyy-zZZZ
-
1x Power supply connector Weidmüller BCZ 3.81/04/180F SN SW (1792970000)
-
4x M4x8 securing screws for VESA100 mounting
1.7
Installation
The installation of the system is described in chapter 2.7.5 this documentation.
For details regarding the integrated IPC see separate product documentation e.g. DOC/IPC_SL8-E.
1.8
Safety Recommendations and Warnings
The products are intended for measurement, control and communications applications in industrial environments. The products must be
assembled and installed by specially trained people. The strict observation of the assembly and installation guidelines is mandatory.
The use of the products in systems in which the life or health of persons is directly dependent (e.g. life support systems, patient monitoring
systems, etc.) is not allowed.
The use of the products in potentially explosive atmospheres requires additional external protection circuitry which is not provided with the
products.
In case of uncertainty or of believed errors in the documentation please immediately contact the manufacturer (address see chapter 7.1). Do not
use or install the products if you are in doubt. In any case of misuse of the products, the user is solely liable for the consequences.
1.8.1
General warnings
Important note
Ensure that the power supply is disconnected from the device before working on the
device (connecting interfaces, replacing flash cards, batteries, opening the enclosure,
etc.).
Important note
The output voltage of the external power supply shall be SELV and shall be limited
power source according to clause 2.5 EN 60950-1.
Please read the safety instructions of the power supply before installing/connecting
the device.
1.8.2
EMC
Important note
This is a Class A product and not intended to be used in domestic environment. The
product may cause electromagnetic interference. Appropriate measures must be
taken.
