Protouch-wide: user documentation
DOC/PROTOUCH-WIDE; V1.5
DOC_PROTOUCH_WIDE_V1.5.docx
Seite 6 von 41
© 2019 Syslogic Datentechnik AG | All rights reserved
1.2.3
Information pictograms indicate the following:
Important information about the product or the relevant section of the document requiring the particular attention of the reader is marked as
followed:
Indicates important and instructional information.
1.3
Copyright note
This documentation is the intellectual property of Syslogic Datentechnik AG, which also has the exclusive copyright. Any modification of the
content, duplication or reprinting of this documentation, as well as any distribution to third parties can only be made with the express permission
of Syslogic Datentechnik AG.
Syslogic Datentechnik AG does not accept any liability for damages arising from the use of any incorrect or incomplete information contained in
this documentation or any information missing.
All brand and product names are trademarks or registered trademarks of the owner concerned.
1.4
Contents of this Documentation
This document addresses to system integrators, programmers and instructed installation and maintenance personal working with the
PROTOUCH-WIDE system. It provides all information needed to configure setup and program the product. For further information consult the
documentation of the mounted Mainboard e.g. DOC/IPC_SL8-E.
1.5
Additional Products and Documents
1.5.1
Hardware Products
The following hardware products are useful together with this documentation:
–
IPC/COMPACT-8 Documentation
; see [1]
1.5.2
Software Products
There are no additional software products except operating systems:
–
Operating Systems: check chapter 5.4 for a list of supported implementations.
1.5.3
Documents
For details regarding the integrated IPC see separate product documentation e.g. DOC/IPC_SL8-E.
