IPC/RSL8xxx-XxxxE: user documentation
DOC/IPC_RSL8-E; V1.9
© Syslogic Datentechnik AG, Switzerland, http://www.syslogic.com
7
/
80
1
Introduction
1.1.
General remarks
The content and presentation of this document has been carefully checked. No responsibility is
accepted for any errors or omissions in the documentation.
Note that the documentation for the products is constantly revised and improved. The right to
change this documentation at any time without notice is therefore reserved.
Syslogic is grateful for any help referring to errors or for suggestions for improvements.
The following registered trademarks are used:
IBM-PC, PC/AT, PS/2
trademarks of IBM Corporation
I
2
C
trademark of Philips Corporation
CFast
trademark of CompactFlash Association
PC/104
trademark of PC/104 Consortium
PCIe
trademark of PCI-SIG
1.2.
Contents of this Documentation
This document addresses to system integrators, programmers and instructed installation and
maintenance personal working with the industrial PC system. It provides all information
needed to configure, setup and program the IPC/RSL8xxx-AxxxE systems. For complete
information also the documentation of the mounted communications and I/O boards must be
consulted. In the following paragraphs all descriptions referenced to RSL8 apply to all, the
IPC/RSL8-AxxxE and products, if not declared otherwise.
1.3.
Additional Products and Documents
1.1.1.
Hardware Products
The following hardware products are useful together with the RSL8 system:
–
Syslogic PC/104 communication boards (see product catalog)
–
Syslogic PC/104 I/O boards (see product catalog)
1.1.2.
Software Products
The following software products are useful together with the RSL8 system:
–
IPC/IOCOMSW-1A: Sample program code and utilities for x86 based PC/104
systems
