
IPC/COMPACT4-XS: user documentation
DOC/COMPACT4-XSE; V1.2
© Syslogic Datentechnik AG, CH-5405 Baden-Daettwil, Switzerland, http://www.syslogic.ch
8
/
31
1.4.4. Documents
Additional documents to the hardware and software described above:
Reference
Ordercode
Document
Manufacturer
[1]
DOC/COMPACGP-1FE
Documentation of the base
board
IPC/COMPACGP-2EE, -3EE
IPC/COMPACGP-1FE, -3FE
IPC/COMPACGP-1GE, -3GE
Syslogic AG
[2]
DOC/IPC_NETIPC4-E
User documentation of the
IPC/NETIPC-4
Syslogic AG
[3]
DOC/DEBIAN50-4A
User manual for the Debian
Linux Distribution
Syslogic AG
[4]
DOC/IPC_IOCOMSW-E
User documentation for
programming examples and
utilities
Syslogic AG
Tab. 1 Additional Documents
1.5.
Safety Recommendations and Warnings
The products are intended for measurement, control and communications applications in
industrial environments. The use of the products in systems in which the life or health of
persons is directly dependent (e.g. life support systems, patient monitoring systems, etc.) is not
allowed. The use of the products in potentially explosive atmospheres requires additional
external protection circuitry which is not provided with the products.
In case of uncertainty or of believed errors in the documentation please immediately contact
the manufacturer (address see chapter 8). Do not use or install the products if you are in doubt.
In any case of misuse of the products, the user is solely liable for the consequences.
The products contain electronic components which will be damaged by electrostatic
discharges. The recommendations for handling of sensitive electronic equipment must
therefore be strictly followed in all phases of the mounting and installation of the products.
The products are “CE”-certified. The “CE”-conformity, i.e. the compliance to the required
standards is only guaranteed if the corresponding mounting, installation, and cabling guidelines
are strictly observed.
The products are operated with electrical power. Before manipulating the products, they must
be disconnected from the power source and from the communication signals.