HDMI2.0 KVM Matrix Switcher
21
The default password is “admin”.
Apply:
Click to save the changes.
Note:
The new password must be 4 to 16 characters in length (alphanumeric
only).
3) System Version
This section shows the current web UI version and MCU version.
4) FW Update
This section allows you to upgrade firmware of the matrix.
Steps to upgrade firmware:
1) Click “Browse” for the update bin file.
2) Click "Update" to start the Firmware upgrade.
3) The matrix will upgrade and reboot automatically when upgrading firmware
is completed. Please wait for about 30s and then refresh and log in again.
Note:
Do not power off the device when upgrading.
5) System
This section allows users to reboot and reset the matrix.
Reboot:
Click to reboot the device.
Factory Reset:
Click to reset the device to factory defaults.
Note:
Please wait about 1 minutes to re-access Web UI by refreshing the
browser after reboot/reset the device.