1. Read Instructions
All the safety and operating instructions should be read
before the appliance is operated.
2. Retain Instructions
The safety and operating instructions should be retained
for future reference.
3. Cleaning
Unplug this equipment from the wall outlet before
cleaning it. Do not use liquid aerosol cleaners. Use a damp
soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the
approval of the manufacturer as such additions may result
in the risk of fire, electric shock or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with
water.
6. Accessories
Do not place this equipment on an unstable cart, stand or
table. The equipment may fall, causing serious injury to a
child or adult, and serious damage to the equipment. Wall
or shelf mounting should follow the manufacturer’s
i n s t r u c t i o n s a n d a m o u n t i n g k i t a p p r o v e d b y t h e
manufacturer should be used.
This equipment and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the equipment and cart combination to
overturn.
7. Ventilation
Slots and openings in the cabinet and the back or bottom
are provided for ventilation, to ensure reliable operation of
the equipment, and to protect it from overheating. These
openings must not be blocked or covered. Do not block
these openings or allow them to be blocked by placing the
equipment on a bed, sofa, rug, or bookcase. Ensure that
there is adequate ventilation and that the manufacturer’s
instructions have been adhered to.
8. Power Sources
This equipment should be operated only from the type of
power source indicated on the marking label. If you are
not sure of the type of power, please consult your
equipment dealer or local power company.
9. Power Cords
Do not allow anything to rest on the power cord. Do not
locate this equipment where the cord will be damaged by
persons walking on it.
10. Lightning
For added protection for this equipment during a lightning
storm or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the equipment due to lightning and power-line
surges.
11. Overloading
Do not overload wall outlets and extension cords as this
can result in the risk of fire or electric shock.
12. Objects and Liquids
Never push objects of any kind through openings of this
equipment as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the equipment.
13. Servicing
Do not attempt to service this equipment yourself. Refer
all servicing to qualified service personnel.
14. Damage Requiring Service
Unplug equipment from the wall outlet and refer servicing
to qualified service personnel under the following
conditions:
A. When the power-supply cord or the plug has been
damaged.
B. If liquid is spilled, or objects have fallen into the
equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by
following the operating instructions, adjust only those
controls that are covered by the operating instructions as
an improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the equipment to its normal
operation.
E. If the equipment has been dropped, or the cabinet
damaged.
F. When the equipment exhibits a distinct change in
performance, indicating a need for service.
15. Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
16. Safety Check
Upon completion of any service or repairs to this
equipment, ask the service technician to perform safety
checks to determine that the equipment is in proper
operating condition.
17. Field Installation
This installation should be made by a qualified service
person and should conform to all local codes.
I M P O RTANT SAFEGUARDS
Содержание INT100
Страница 1: ......
