Syscom Video INT100 Скачать руководство пользователя страница 25

Страница: 25 / 28

2.8 PTZ Configuration

The INT100 can remotely control the pan/tilt/zoom/focus module of the camera through an I/O

port on the back panel of the system. When networking, the Half Duplex communication line of

the RS485 is used between the INT100 and the PTZ module. When communicating by RS485,

attach a termination resistor (120-150

) on the outside to process without errors. The IRX-100,

manufactured by IDIS, already has a terminal resistor inside.

Refer to the manual for each supported driver for the detailed communication settings between the

INT100 and the PTZ module.

2.9 System Upgrade

This page allows software upgrades to be done at remote sites using a web browser, so that users

do not have to come to the INT100 or take its cover off. Since wrong software upgrades may cause

an unrecoverable system failure, the INT100 will ask for another password to upgrade software.

This password will be included with the upgraded software provided by IDIS.

INT100 User Manual

Содержание INT100





























Результаты поиска

Содержание INT100

Отзывы:

Похожие инструкции для INT100

Бренды по названию

Популярные бренды

Syscom Video INT100, Руководство пользователя

Результаты поиска

Содержание INT100

Отзывы:

Похожие инструкции для INT100

Бренды по названию

Популярные бренды