Syscom Video Direct IP, Руководство по эксплуатации

Страница: 37 / 73

Network Camera
31
 Smart IR : Set the brightness of the IR LED (IR LED supported model only). Check the box
to adjust the brightness automatically. The sensor in the middle of IR LEDs detects illumination.
Uncheck the box to set the brightness manually. The higher the value is set, the brighter it is.
Streaming
 Primary , Secondary , Tertiary : The camera supports multistream video (priority: Primary >
Secondary > Tertiary). Set whether to enable or disable the streams. Some of the settings may
change depending on the settings of streams of higher priority and the tertiary stream may not
be available (see the table below).
Model
Primary Secondary Tertiary
Resolution ips Resolution ips Resolution ips
HD 1280x720 30 1280x720 15 – –
Full HD 1920x1080 30 704x480 30 – –
 Compression : Set up the compression of images for streaming.
 Resolution : Set the resolution of images for streaming. The resolution varies depending on the
camera model. The resolution of the current stream cannot exceed that of a stream of higher priority.
 Quality : Set up the quality of images for streaming.
 Bitrate Control : Set up the bitrate control mode for H.264 compression.
− CBR
(Constant Bitrate): Maintains the current bitrate regardless of the amount of motion.
− VBR (Variable Bitrate): Adjusts the bitrate dynamically based on the amount of motion. The
less motion there is, the less network congestion and the less storage consumption. The quality
may not be as good when compared to the CBR mode
.