SYR Safe-T Connect, Руководство по эксплуатации

Страница: 14 / 28

Installation and commissioning
►
Replace the insulating casing shells.
Fig. 6: Replacing insulating casing
5.3. Commissioning
The Safe-T Connect starts working as soon as voltage (mains adapter, batter-
ies) is applied.
The system goes into the “closed” position.
► Press the button.
The system goes into the “open” position and changes to the normal operating
state.
You can make all the required settings directly on the Safe-T Connect, with the
SYR app on your smartphone or via a PC.
The SYR app is available free of charge from the App Store.
Other operating systems can use an app-like application with their Web browser
from http://syrconnect.de or http://syrconnect.com.
Over Internet connections, settings can be made only using the SYR app or a
web browser.
Note:
Dynamic Host Config-
uration Protocol (DH-
CP) must be available
and enabled on the In-
ternet router so that the
Safe-T Connect is auto-
matically assigned an IP
address.
Note:
If batteries are insert-
ed but the mains adapt-
er is not connected, the
notice “Please connect
mains adapter” will ap-
pear.
14