Synway Information Engineering Co., Ltd
SMG-B Series Analog Gateway User Manual (Version 1.1.0)
Page 61
Authentication Password
Batch Rule
The rule for batch setting the authentication password, including
Increase
and
Decrease
two options.
Authentication Password
Batch Step Size
Sets the increase or decrease step size of the authentication password in the batch
setting.
Authentication Username
Batch Rule
The rule for batch setting the authentication username, including
Increase
and
Decrease
two options.
Authentication Username
Batch Step Size
Sets the increase or decrease step size of the authentication username in the batch
setting.
After configuration, click
Save
to save the settings into the gateway, or click
Cancel
to cancel the
settings.
3.6.3 Port Group
Figure 3-59 Port Group Settings Interface
See Figure 3-59 for the port group settings interface. A port group is a set containing single or
multiple ports, used to specify such properties as
Port Selection
and
Authentication Mode
for
all the ports in it. A new port group can be added by the
Add New
button on the bottom right
corner of the above list. See Figure 3-60 for the port group adding interface. Note that a port which
has been occupied by one port group cannot be chosen by others.
