Synway Information Engineering Co., Ltd
SMG-B Series Analog Gateway User Manual (Version 1.1.0)
Page 11
required not to leave ‘Description’ empty.
Example:
Set
Index
to
99
, fill in
Description
with
test
and configure
Dial Rule
to
123
.
2. Go to ‘Port Settings
Æ
Port Group’ on the WEB interface and click the ‘Add New’ button to
create a new port group and add FXS ports which are connected with stations to it. Refer to
3.6.3 Port Group
for detailed instructions. You may use the default values of other
configuration items and are required not to leave ‘Description’ empty.
Example:
Provided the FXS port which is connected with a station is Port1, check the
checkbox before
Port1
, set
Index
to
1
, fill in
Description
with
test
, and keep the default
values of other configuration items.
3. Go to ‘Route Settings
Æ
Tel
Æ
IP’ on the WEB interface and click the ‘Add New’ button to add
a new routing rule. Refer to
3.7.3 Tel
Æ
IP
for detailed instructions. Select the port group
created in Step2 as ‘Source Port Group’ and fill in ‘Destination IP’ and ‘Destination Port’ with
the IP address and the Port number you plan to call. You may use the default values of other
configuration items and are required not to leave ‘Description’ empty.
Example:
Provided the remote IP address intended to call is 192.168.0.111 and the port is
5060. Set
Index
to
63
,
Source Port Group
to
1
, fill in
Description
with
test
, configure
Destination IP
to
192.168.0.111
,
Destination Port
to
5060
, and keep the default values of
other configuration items.
4. Pick up the station and dial the number set in Step1 to ring the remote IP phone. If you have
set a particular number in Step 1, only this number you can dial; if you have set a string of ‘x’s,
how many ‘x’s there are, how many random numbers you can dial.
Example:
Pick up the station and dial 123. Then the IP phone with the IP address
192.168.0.111 and the port 5060 will ring.
Situation 3: Call from an IP phone to a station (IP
Æ
Tel)
1. Go to ‘Port Settings
Æ
Port Group’ on the WEB interface and click the ‘Add New’ button to
create a new port group and add FXS ports which are connected with stations to it. Refer to
3.6.3 Port Group
for detailed instructions. You may use the default values of other
configuration items and are required not to leave ‘Description’ empty.
Example:
Provided the FXS port which is connected with a station is Port1, check the
checkbox before
Port1
, set
Index
to
1
, fill in
Description
with
test
, and keep the default
values of other configuration items.
2. Go to ‘Route Settings
Æ
IP
Æ
Tel’ on the WEB interface and click the ‘Add New’ button to add
a new routing rule. Refer to
3.7.2 IP
Æ
Tel
for detailed instructions. Fill in ‘Source IP’ with the
IP address which initiates the call and select the port group created in Step1 as ‘Destination
Port Group’. You may use the default values of other configuration items and required not to
leave ‘Description’ empty.
Example:
Provided the IP address of the IP phone which initiates the call is 192.168.0.111.
Set
Index
to
63
,
Destination Port Group
to
1
, fill in
Description
with
test
, configure
Source
IP
to
192.168.0.111
, and keep the default values of other configuration items.
3. Pick up the IP phone and call the IP address and port of the SMG-B analog gateway to ring
the station.
Example:
Provided the IP address of the SMG-B analog gateway is 192.168.0.101 and the
port is 5060, use the IP phone to call the IP address 192.168.0.101 and the station connected
with Port1 will ring.
Step 8: Enable the auto dial feature. (Skip this step if not necessary.)
Go to the Port Settings interface to enable the auto dial feature and set the parameters ‘Auto Dial
Number’ and ‘Wait Time before Auto Dial’. If there is no dialing operation in a time period (i.e. Wait
Time before Auto Dial) after pickup, the port will automatically call the preset number (i.e. Auto
Dial Number). Refer to
3.6.1 FXS
for detailed instructions.
