Copyright 2020 by Synthetic Sound Labs LLC - 3650 Digital Sequencer
Page | 8
PERSISTENT AUTO ADVANCE MODE
Purpose
To ensure that AUTO ADVANCE mode stays turned on until you manually turn it off (even if you press RUN)
Default
Disabled / Off
Operation
To enable PERSISTENT AUTO ADVANCE MODE, press and hold PROG/RESET then press STEP DOWN/AUTO ADV,
and hold both buttons for 1 second. The STEP 16 LED will blink twice when enabled and flicker once briefly
when disabled.
LIVE TRANSPOSE
Purpose
Transpose entire song / sequence up or down using the note keys. When this mode is enabled and the
sequencer is running (and not displaying SONG/SEQUENCE SELECT), you can use the note keys to temporarily
transpose your entire sequence up or down.
Default
Disabled / Off
Operation
Hold down the PROG/RESET button, then tap the LOOP/[XPOS] button to cycle through the different LIVE
TRANSPOSE modes:
•
On:
Root key at bottom (C note) of keyboard
•
On:
Root key in center of (F note) keyboard
•
On:
Root key at top (B note) of keyboard
•
Off:
Disabled
The LOOP LED will flash twice for each ON mode, along with the selected root key, and will flicker when LIVE
TRANSPOSE mode has been turned off.
When LIVE TRANSPOSE is ON, instead of the usual current-note display, the NOTE and OCTAVE LEDs will display
the transpose status:
•
Steady NOTE LED:
Root key
•
Blinking NOTE LED:
Currently selected transpose amount
•
Flickering NOTE LED:
All the notes in between
Pressing the root key (indicated by a steady NOTE LED), will set the transpose amount to 0, and your sequence
will play just as it is programmed.
By pressing a NOTE key
above
the root key, the CV OUT will be transposed
up
by that number of steps. For
example, if the root key is the F in the middle of the keyboard and you press the G key, then your sequence will
be temporarily transposed up 1 step (2 semitones). The LED corresponding to the key you selected will blink to
let you know at a glance how much you are transposing and in which direction. All the LEDs in between the root
key and your selected key will flicker dimly.
