manualshive.com logo in svg

Syntax SV266AD, Руководство пользователя

Поделиться
Скачать
Syntax SV266AD Скачать руководство пользователя страница 59

 

Power Management Setup  

The Power Management Setup Menu option is used to change the values of 
the chipset registers for system power management.

 

Power Management Timeouts 

The power-saving modes can be controlled by timeouts. If the system is 
inactive for a time, the timeouts begin counting. If the inactivity continues so 
that the timeout period elapses, the system enters a power-saving mode. If 
any item in the list of Reload Global Timer Events is Enabled, then any activity 
on that item will reset the timeout counters to zero. 

Wake Up Calls 

If the system is suspended, or has been powered down by software, it can be 
resumed by a wake up call that is generated by incoming traffic to a modem, a 
LAN card, a PCI card, or a fixed alarm on the system realtime clock. 

Phoenix – AwardBIOS CMOS Setup Utility 

Power Management Setup 

Item Help 

 ACPI 

function 

[Enabled] 

 

Power Management Option 

[User Define] 

 

HDD Power Down 

[Disable] 

 Suspend 

Mode 

[Disable] 

 

Video Off Option 

[Suspend --> Off] 

 

Video Off Method 

[DPMS Support] 

 

MODEM Use IRQ 

[3] 

 

Soft-Off by PWRBTN 

[Instant-Off] 

 

State After Power Failure 

[Off] 

  IRQ/Event Activity Detect 

[Press Enter] 

Menu Level       
 

↑

 

↓

 

→

 

←

 : Move  Enter  : Select 

+/-/PU/PD:Value:  F10: Save  ESC: Exit  F1:General 

Help F5:Previous 

Values 

F6:Fail-Safe Defaults 

F7:Optimized Defaults 

ACPI Function (Enabled) 

This mainboard supports ACPI (Advanced Configuration and Power 
management Interface). Use this item to enable or disable the ACPI feature. 

Note:

  ACPI is a power management specification that makes hardware status 

information available to the operating system. ACPI enables a PC to turn 
its peripherals on and off for improved power management. It also allows 
the PC to be turned on and off by external devices, so that mouse or 
keyboard activity wakes up the computer.  

Power Management Option (User Define) 

This item acts like a master switch for the power-saving modes and hard disk 
timeouts. If this item is set to Max Saving, power-saving modes occur after a 
short timeout. If this item is set to Min Saving, power-saving modes occur after 

39 

Содержание SV266AD









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды