F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
Processor
The SV266AD mainboard uses an AMD 462-pin Socket A that
has the following features:
•
Supports 100/133 MHz frontside bus (FSB)
•
Accommodates AMD Athlon/Duron processors
Chipset
The KT266A Northbridge and VT8235 Southbridge chipsets are
based on cost-effective and energy efficient chipset architecture
for implementing AGP/PCI desktop personal computer systems
with proven reliability and performance.
•
Supports Socket-A (Socket-462) AMD Athlon processors
•
100/133 MHz DDR (Double Data Rate) transfer on Athlon
CPU address and data buses
•
Provides full featured Accelerated Graphics Port (AGP)
controller which is v2.0 compliant and supports 66 MHz
1x, 2x and 4x modes delivering vivid 3D graphics and
high quality video performance
•
Supports 66 MHz V-Link Host interface with a peak
bandwidth of 266 MB/s and an intelligent V-Link
transaction protocol to eliminate data wait-state/throttle
transfer latency
•
Advanced high-performance DDR SDRAM memory types
•
Integrated USB 2.0 Controller with three root hubs and six
function ports
•
Dual Channel Ultra DMA 33/66/100/133 master mode
EIDE controller
Additional key features include support for six USB ports, an
AC 97 link for audio and modem and hardware monitoring.
Graphics
The mainboard includes an AGP slot that provides four times the
bandwidth of the original AGP specification. AGP technology
provides a direct connection between the graphics sub-system
and the processor so that the graphics do not have to compete for
processor time with other devices on the PCI bus.
Memory
•
Accommodates two unbuffered 2.5V 184-pin slots
•
Supports the following memory speeds: DDR SDRAM:
PC2100/ PC1600
•
Each slot supports up to 1 GB with a total maximum
capacity of 2 GB
Audio
The VIA VT1612A Audio Codec conforms to the AC'97 2.2
specifications providing 18-bit resolution performance. With 2
channel outputs the VIA VT1612A provides high-performance
stereo quality for headphones or speaker connections.
•
AC'97 2.2 S/PDIF extension compliant codec
•
18-bit stereo full duplex
•
3D stereo expansion for simulated surround
•
2 stereo, 2 mono analog line-level inputs
Onboard LAN
(optional)
The VT6103 is a Physical Layer device for Ethernet 10BASE-T
and 100BASE-TX using category 5 Unshielded, Type 1
Shielded, and Fiber Optic cables.
•
Dual Speed – 100/10 Mbps
•
Half And Full Duplex
•
Meet All Applicable IEEE 802.3, 10Base-T and 100Base-
2
