Synrad Firestar V30, Справочное руководство

Страница: 14 / 36

12
Synrad
Firestar OEM v30
reference guide
Introduction
Although the OEM v30 laser is part of the Firestar v-Series family, its user interface differs significantly from the standard
v-Series interface design. With the exception of the optoisolated PWM input (
PWM Positive
), all OEM v30 inputs and out-
puts operate at 5V logic levels to ensure compatibility and ease of installation when retrofitting the Firestar v30 into existing
laser systems. The OEM v30 control board also differs from other Firestar v-Series models in that it does not incorporate a
built-in tickle generator; users
must
provide a 5 kHz, 1 µs tickle pulse between applied PWM signals.
The OEM v30 laser is available in air-cooled (SAE), fan-cooled (SFE), or water-cooled (SWE) configurations.
The Firestar OEM v30 laser is an OEM product intended for incorporation as a component in a laser processing system and
as such does not comply with 21 CFR, Subchapter J or EN 60825-1 without additional safeguards.
Inventory
Ship kit
Table 3 lists items included in the v30 ship kit.
Table 3
Ship kit contents
Shipping Box Contents Qty Shipping Box Contents Qty
SYNRAD Firestar OEM v30 Laser ................1 Firestar OEM v30 Reference Guide ............. 1
Quick Start Plug (except SA models) ...........1 Spare Fuse ..................................................... 2
Cooling Tubing (water-cooled only) .............1 Final Test Report .......................................... 1
Mounting Bolts ..............................................3
Ship kit contents
Each item listed in Table 3 is described below:
SYNRAD Firestar OEM v30 Laser – for cutting, welding, drilling, and marking a wide variety of products.
Quick Start Plug (except SA models) – connects to the v30’s Interface A connector. A jumper built into the plug enables the
v30 for initial start-up and testing.
Cooling Tubing (water-cooled only) – carries cooling water from the chiller to the laser and back. This black polyethylene
tubing is 1/2-inch O.D. by 30 feet and must be cut to length.
Mounting Bolts – 1/4–20 UNC bolts fasten the laser to your mounting surface.
Firestar OEM v30 Reference Guide – provides setup, operation, and maintenance information for your v30 laser.
Spare Fuse – fast-blow 20 A fuse protects the Firestar v30’s internal circuitry.
Final Test Report – contains data collected during the laser’s final pre-shipment test.