manualshive.com logo in svg

SynQor UPS-1250 Series, Руководство оператора, Страница: 7 / 52

Поделиться
Скачать
SynQor UPS-1250 Series Скачать руководство пользователя страница 7

006-0007097 

02/14/2019 

Rev E 

7 of 52 

UPS-1250DC Guide

www.synqor.com

Section II 

General Product Information

Product Description

The SynQor UPS-1250 DC Output Series is an advanced technology military-grade uninterruptible 

power supply (UPS) that uses lithium polymer batteries and highly efficient power electronic 

circuitry to achieve a high power level and battery run-time in a low-profile, low-weight, rack-

mountable  package.  It  provides  voltage  conditioning,  electrical  isolation,  and  power  flow 

smoothing  between  the  power  inputs  and  its  power  outputs.  It  provides  battery  backed-up 

power when other power sources are not present.

A communication/control port is available to permit monitoring and control by a host computer 

system. Front panel LEDs and an audible alarm provide information on the status of the UPS and 

the battery pack.

The UPS-1250 DC Output Series products can draw power from an AC input having a wide range 

of voltage and frequency levels, or from an 28 V nominal DC input. The AC input has priority over 

the DC input. The UPS provides up to 1250 W of DC output power at 28 volts nominal.

The electronic circuitry within the UPS-1250 DC Output Series products is designed, qualified 

and screened according to SynQor’s MIL-COTS Standards. It complies with the requirements of 

MIL-STD-704F, MIL-STD-1399-300B, MIL-STD-1275D and MIL-STD-461F, as well as IEC-EN61000 

specifications for world-wide commercial utility applications.

The UPS-1250 DC Output Series products are designed and manufactured to withstand the harsh 

environments and use encountered in military applications. The electronic circuitry and battery are 

contained in a sealed chamber constructed from a die-cast aluminum chassis that is weather-proof 

and shock-proof. Redundant, water-proof fans on the rear panel draw cooling air over the heat-sink 

fins below the sealed chamber. Military-grade circular connectors are used, and optional attached 

connector covers are available for when the cables are not attached. The UPS-1250 DC Output 

Series products comply with a wide range of testing according to MIL-STD-810G.

The UPS-1250 DC Output Series has three product formats: 1) a 1U high unit that has a standard 

battery pack that provides >10 minutes of full-power run-time, 2) a 2U high unit that has an 

extended  battery  pack  that  provides  >24  minutes  of  full-power  run-time  and  3)  a  2U  high, 

shallow-rack unit that has a standard battery pack that provides >10 minutes of full power run 

time. The first weighs approximately 33 lbs., the second 52 lbs. and the third 33 lbs.

The SynQor UPS-1250 DC Output Series products are designed and manufactured in the U.S.A.

Содержание UPS-1250 Series





















































Отзывы:

Нет отзывов