Section II
General Product Information
006-0007097 02/14/2019
Rev E
10 of 52
UPS-1250DC Guide www.synqor.com
Part Numbering Scheme and Options
This table shows the part numbering scheme for the full line of SynQor UPS products:
DC Base Models
Model Number
Power
Battery Run-Time @Full Power (80% Power)
Height (W x D x H)
Weight
UPS-1250-S-1U (1 Standard Battery Pack)
1250 W
>10 min. (>13 min.)
1U (17” x 22.25” x 1.73”)
33 lbs.
UPS-1250-S-2S (1 Standard Battery Pack)
1250 W
>10 min. (>13 min.)
2U (17” x 13.80” x 3.40”)
33 lbs.
UPS-1250-E-2U (1 Extended Battery Pack) 1250 W
>24 min. (>31 min.)
2U (17” x 22.25” x 3.33”)
52 lbs.
Base Model
Options
Options
AC Input
Frequency
DC
Regulation
Type
DC
Output
Voltage
DC
Input
Additional
Options
AC Input
Frequency
L
47-65 Hz
W 47-800 Hz
DC
Regulation
R
Fully Regulated
UPS-1250-S-1U-
UPS-1250-S-2S-
UPS-1250-E-2U-
L
W
R
28
24
D00
-0
-E
00
CE
DC Output
28 28 V Output
24 24 V Output
Not all combinations make valid part numbers, please contact SynQor for availability.
DC Input
D00 DC Input
See the Product Summary web page for more options.
Additional
Options
-0 No Ethernet/SNMP
Examples:
-E Ethernet/SNMP with Configuration Loading
UPS-1250-S-1U-LR28D00-000, UPS-1250-E-2U-WR28D00-E00
00 No CE Marking
UPS-1250-S-2S-LR28D00-0CE (Parallelable with CE mark)
CE CE Marking
The UPS-1250 DC Output Series of products provide up to 1250 W of total output power (DC).
They come in three different physical formats:
• A UPS-1250-S-1U high, 33 lb. rackmount unit that uses the standard battery pack that provides
>10 minutes of battery run-time at full power
• A UPS-1250-E-2U high, 52 lb. rackmount unit that uses the extended battery pack that provides
>24 minutes of battery run-time at full power
• A UPS-1250-S-2S high, 33 lb. shallow rackmount unit that uses the standard battery pack that
provides >10 minutes of battery run-time at full power
Each format has various options that can be specified according to the part numbering scheme
shown in the table:
• The allowable frequency of the AC INPUT can either be in the 47-65 Hz range (for 50 Hz and/
or 60 Hz systems) or in the 47-800 Hz range (for 400 Hz and Variable Frequency systems)
• The output voltage of the UPS-1250 DC Output Series can be 28 volts nominal.
• There is a DC INPUT that is specified to comply with MIL-STD-704F and MIL-STD-1275D for
28 V systems.
• RS232 serial port and logic-level I/O communication are included in the standard model. An
Ethernet port providing web and SNMP interfaces is an available option.