SynQe gSmart8900, Быстрый просмотр руководства

Страница: 21 / 22

20
Put the scanned label close to the back of the mobile phone, press
[OpenPort] to open the port, then press [Request] to send the request of
reading card. If press [Card ID] when unread to read the ID number of the
label, the ID number will appear at the right side of the interface. Press
[Select] and you can choose any sector of the sectors 0-15 by clicking the
lower triangular of the sector area, then press [Authenticate] to show pass
if authenticated. After being authenticated, you can choose any block of
blocked 0-3 by clicking the lower triangular, then press [Read] to read the
label, and finally card information will be shown in the windows of Hex and
Text. If the card information is empty, you can write the card. Input digits,
letters and characters in Text, press [Write] to enable successful card
reading and read the corresponding card information.
The maximum digits for reading card is hexadecimal.
Notice:
1. When selecting Sector 0 & Blocked 0, it can read card instead of
writing card.
2. Each time of changing the sector to read/write the card, it needs to
repress [Authenticate].
3. In the related operations, if label information cannot be read, there
will be tip of No tag ERROR.
Common Functions
The built-in common functions of the mobile phone include the