12
Chapter 2: Hardware Setup
2
Tighten the screws to secure the low-profile bracket.
To install the network interface card:
1
Follow steps 1 to 4 of "Install a RAM Module" to remove the cover from the RackStation.
2
To install the network interface card, follow the steps below:
a
Remove the screw on the port access cover. Then remove the access cover.
b
Align the card connector with the expansion slot and insert the card into the slot.
Important:
Make sure the connector is fully inserted. Otherwise, the network interface card might not be able to
function properly. For greater perfomance, we highly recommend installing the network interface card into the PCI-E
3.0x8 (white) slot first.
c
Tighten the screw to secure the network interface card.
