Synetik ErgoCare Vertiflex 60, Руководство пользователя

Страница: 9 / 12

To change the angle, hold the pivot handle firmly with one hand
while activating the cylinderactivation lever with your other
hand
(fig. 13a) . To maintain positioning at a specific angle,
simply release the activation lever at the desired angle. To
maintain the user position at a certain angle, loosen the knob
just above the cylinder activation lever and slide the round-
tipped rod to the desired position to keep the angle in place
(fig. 13b) . Retighten the knob.
NOTE - If you have difficulty in reaching it or tightening it securely,
use the tightening tool provided for this purpose
(fig. 13c-d) .
PARTS REPLACEMENT PROCEDURES
If a part of the Vertiflex 60 is broken or missing, stop using the product and contact a Synetik
ErgoCare’s authorized representative or your territory. Order of additional or replacement parts can
be done through a Synetik ErgoCare’s authorized representative or via our customer service.
DAILY INSPECTION OF VERTIFLEX 60 STANDING FRAME
Synetik ErgoCare recommends that a daily visual inspection be performed by a therapist, parent
or caregiver to ensure the safe use of the product. In order to perform the daily inspection of the
Vertiflex 60 Standing Frame, you will need to:
• Check that all the knobs are in place and tight.
• Inspect the protective covers and straps to ensure there are no signs of wear.
• Make sure that the wheels turn freely and lock securely.
• Check that the footrest is firmly secured into position.
•
•
•
Verify that no part of the user’s body or that of the caregiver can be wedged or touched during the
angle-change procedure.
Check that all Velcro straps and other fasteners are in place and properly adjusted.
Make sure the standing frame is at a proper distance away from any surrounding
fig. 13c fig. 13d
fig. 13a
fig. 13b
ADJUSTMENT PROCEDURE