Synetik ErgoCare Vertiflex 60, Руководство пользователя

Страница: 8 / 12

ADJUSTMENT PROCEDURE
11. TRAY ADJUSTMENT
To install the tray, insert the rods into the round glides located on the
hip supports
(fig. 11a) . Angle the end of the tray upward to slide it in
more easily, then release it at the desired position. The mechanism
will then block the tray at this spot. For added safety, tighten the
knob under the round glide to secure the tray into position
(fig. 11b) .
To adjust the height of the tray, loosen the knob on each side behind the hip
support
(fig. 11f) .
Slide up or down to the desired height and retighten.
To adjust the tray angle, use the adjustable lever
(fig. 11c-d) . To do this you will need to raise the
lever slightly and then turn clockwise to tighten
and counter-clockwise (by raising it) to reposition
the lever in the proper position.
Rotate the tray to the desired angle and retighten the adjustable lever. For depth
adjustment of the tray, loosen the two knobs on each side, located under the tray
on the inner section of the angle adjustments
(fig. 11e) . Slide the tray on its glides
to the desired location and retighten the four knobs.
12. STRAP ADJUSTMENT
Some supports are anchored using a Velcro strap to facilitate positioning of the user.
Insert the strap into the metal loop and fold the Velcro closure
(fig. 12a) . In this
way, the user will now be firmly and comfortably positioned. Also make sure that all
cushions are centered once these adjustments are completed.
fig. 11c fig. 11d
fig.11e
fig. 12 a
fig.11f
fig. 11b fig. 11a
13. STANDING FRAME ANGLE ADJUSTMENT
To facilitate the transfer in or out of the standing frame or to optimize the comfort of the user, the
angle can be adjusted on this device.
When making any changes to the angle, be sure to:
Lock all the wheels before.
Hold the device in place firmly, with one hand on the pivot handle while activating the cylinder
activation lever with the other hand. •
•