Synesso MVP, Техническое руководство

Страница: 15 / 80

15
MODEL SPECIFIC REQUIREMENTS & INSTALLATION
Model Specific Plumbing Requirements:
Both the MVP Hydra and MVP machines require one incoming water source. For the MVP Hydra machines,
the incoming water passes through a manifold (this was part of the line pressure regulator) from xx
- xx -
3854 each pump has a regulator . Once again, follow the color coding for proper installation of the hoses
from the output of each pump to the machine. See the pictures below for MVP Hydra compression line
color matching. For the MVP machines, the incoming water routes directly to the single pump assembly.
MVP Hydra Manifold
Steam Tank Line (Pink Zip
Tie) is Matched.
Group 1 Pump - Grey Zip
Tie is Matched
Group 2 Pump - Purple
Zip Tie is Matched
Group 3 Pump - Brown
Zip Tie is Matched
Pressure Regulators:
MVP Hydras come with line pressure regulators built into the bypass pump assemblies. MVP machines do
not come standard with a line pressure regulator but it can be installed along with a manifold as an acces-
sory to the machine. The pressure regulator is used to control the stage 1 preinfusion pressure. It comes
factory set to the maximum setting of 50 psi. For more on setting up the different pressure stages please
refer to page 19.
Mini Pressure Regulator
Discontinued Watts
Pressure Regulator