Synesso Cyncra Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 68

Synesso Cyncra Скачать руководство пользователя страница 37

37

PROGRAMMING

Error codes are
displayed here

In an effort to prevent damage to machines and to help operators troubleshoot issues, Synesso™has
engineered several safeguards into the programming. These codes will help users identify operational
issues with the machine as well as automatically prevent greater problems from occurring. By
understanding these codes, operators can remedy issues more quickly.

Error code key (See Pages 38-44 for more info)

BR

– Brew System Codes

BV

– Brew Valve has been on for 5 minutes. Valve will be disabled until group is turned off.

OT

– Over Temperature. (220F)

UT

– Group reads under 180F for 1 minute while trying to heat (Under Temp.)

PR

– Pump Relay coil has been on for 5 minutes. Relay will be disabled until group is turned

off.

BP

– Bypass Valve has been held on for 5 minutes.

Valve will be disabled until group is turned off.

01, 02,

or

03

– Indicate which brew group is reporting an error.

ST

– Steam System Codes

LW

– Low Water probe is not in contact with water (an audible alarm will also sound)

FP

– Fill Probe is not in contact with water for 1 minute.

FV

– Fill Valve has been held on for 5 minutes.

Valve will be disabled until machine is turned off.

OT

– Over Temperature (270F)

01

– All Steam System Codes end in

01

VM – Volumetric System Codes

UF

– Unexpected flow while group is off.

01, 02,

or

03

– Indicate which flow meter is reporting an error.

Example:

After brewing a shot, group 2 was left in the brew position. After 5 minutes, the machine will register
a

BRBV02

and a

BRPR02

error; which translate to “Brew System, Brew Valve Group 2” and “Brew

System, Pump Relay is timed out, Group 2.” At this time the machine will automatically shut off both
the brew valve and the pump relay to ensure they will not be damaged. They will remain off until the
group is returned to the off (far right) position, which allows the group to return to normal operation.

«
...
35
36
37
38
39
...
»

Содержание Cyncra





































































Отзывы:

Нет отзывов