- 34 -
Step 4:
Set global spare disk.
To set global spare disks, please follow the procedures.
1. Select
“/ Volume config / Physical disk”
.
2. Select the free disk(s) by clicking the checkbox of the row, then click
“
“ to set as global spares.
3. There is a “GS” icon shown up at status 1 column.
Figure 3.5.7.7
(Figure 3.5.7.7: Slot 5 has been set as global spare disk.)
Step 5:
Done. They can be used as SCSI disks.
Delete UDVs, VG, please follow the steps.
Step 6:
Detach LUN from UDV.
In
“/ Volume config / Logical unit”
,
Caution
Be careful to avoid conflicts between SCSI ID at the same
SCSI bus
.
