- 31 -
3.5.7 Examples
Take 2 examples to create volumes. Example 1 is to create two UDVs shared the
same CV (global cache volume) and set a global spare disk. Example 2 is to
create two UDVs. One shares global cache volume, the other uses dedicated
cache volume. Set a dedicated spare disk.
•
Example 1
Example 1 is to create two UDVs in one VG, each UDV uses global cache
volume. Global cache volume has been created after system boots up. So it
doesn’t do anything about CV. Then set a global spare disk. The last, delete all of
them.
Step 1:
Create VG (Volume Group).
To create the volume group, please follow the procedures:
Figure 3.5.7.1
1. Select
“/ Volume config / Volume group”
.
2. Click
“
“.
3. Input a VG Name, choose a RAID level from the draw, press
“
“ to choose the RAID PD slot, then press “
“.
4. Check the outcome. Press “
“ if all setups are correct.
5. Done. A VG has been created.
Figure 3.5.7.2
