Synel Industries Ltd.
11
Stand-Alone Terminals
Set-up mode
3.
Set-up mode
Reader programming can be divided to three categories:
1.
Access Cards configuration (authorized personnel)
2.
General definitions
3.
Indicator definitions
All definitions of Management modes are listed in the table below.
The codes in the table below can be used only after completing set-up mode
as follows:
Step 1.
Press 3 times simultaneously on keys 1 & 2 (each time will be fol-
lowed by a short beep and an orange led will be lit).
Step 2.
Enter the 8 digit master code (the default number is 12345678).
Then insert the relevant set-up code (see next page).
Note: Using the Clear key, you can go back to the previous stage!
Input
Indicator signalling
1st 1&2
Short beep+2nd amber led ON
2nd 1&2
Long beep+2nd amber led ON
3rd 1&2
2 long beeps+2nd green led flashes
