Synclavier REGEN, Руководство пользователя

Страница: 127 / 153

Synclavier Regen User Manual 120
Vib
/LFO A
Invert
Inverts the direction of the vibrato wave. E.g., a sine wave starts at
zero and increases in its first quadrant. With
Vib Invert on, the sine
wave would start at zero and decrease in its first quadrant.
Vib
Quantize
The fluctuations produced by vibrato are normally smooth and
gradual. However, you can quantize, or step, in semitone intervals the
fluctuations in pitch. After you set the vibrato wave, depth and rate,
turn on the quantize function by pressing
Quantize .
To witness this effect, try listening to a partial with vibrato set to a low
Vib Rate, a high Vib Depth, and toggle Quantize On and Off.
Vib
/LFO A
Bias
Create a vibrato in which the pitch fluctuates entirely above the key
pressed. Press Bias and play a note. As a result, the lowest point of
pitch fluctuation is the pitch of the note played. The highest point is
twice the number of semitones set for the vibrato depth.
Try modifying the vibrato of a partial timbre now. A sine wave vibrato of 6Hz is
typically used to create the style of vibrato associated with vocalists and string or
wind instruments, so this might be a good place to start your experimentation.
Remember that you can put the Swiper into fine mode by holding your thumb
on the Down Nudge and use your finger to operate fine mode.
Vib/
LFO A
Wave Shape
sine
triangle
ramp (sawtooth)
inverted ramp
square