After your first login, if you are prompted to change your password from the default, follow the on-screen
instructions.
Discovering Unconfigured Devices with Census
You'll next want to add a few devices to the system to get a feel for how it works. Again, these instructions are for
getting a quick idea of how easy the system is to configure and use, and not intended to be used for a full
installation. Please consult the SimplySNAP User Guide for full instructions.
NOTE:
Before proceeding, make sure all of your lighting controllers are properly installed and power is
applied.
To access the Census Page, click the
Census
menu item under
Devices
in the navigation menu. From there, you
can start a "census" of the unconfigured
SimplySNAP
devices with your network settings. (Channel, Network ID,
Encryption Settings, Enhanced CRC Settings) These devices will appear in a list to provide you with an easy way
to configure them.
To perform a census of unconfigured devices:
1. Click the
Start Census
button. SimplySNAP will begin to search for unconfigured devices in your network.
Click the
Confirm
button in the dialog to start the census or
Cancel
to dismiss the confirmation dialog.
While the census is running, you can cancel the census in progress by clicking the
Cancel
Census
button.
2. If unconfigured devices are discovered, you will be presented with a list of the devices. To add a single
device to your network, click the
Add Device
button to the left of the device you wish to add. To add
multiple devices, click the
Add Selected Devices
button. To remove an unconfigured device, click the
Dismiss
button and
Confirm
it in the dialog. The new device(s) will appear in a pane on the
Lights and
Sensors
page.
Any devices dismissed will have to be rediscovered by running another census.
Page 8
|
SimplySNAP