Operations
SimplySNAP is typically installed in environments where it is programmed once and set to run autonomously with
very little interaction. However, it does allow active control of lighting via the user interface.
Activating, Deactivating and Dimming Lights
After a light is entered into the system it is controlled directly from the
Lights and Sensors
page. Broader control
is accomplished through the use of zones, schedules, and sensors, which are explained fully in the
SimplySNAP
User Guide.
Lights may be switched on and off using the
Off
and
On
buttons , while dimming is controlled using the
corresponding slider switch.
Next Steps
You have now completed the SimplySNAP lighting solution introduction. For more detailed information, including
administration and configuration of zones, sensors, and behaviors, consult the SimplySNAP user manual.
Page 10
|
SimplySNAP