Hardware Setup
SNAP DMX
User Guide
5
About Your SNAP DMX Wireless
Adapters
SNAP DMX Adapters
The SNAP DMX family of industrial-class, mesh networking, wireless DMX adapters
allows you to connect DMX controllers, lights and other DMX devices to each other
without using cables. SNAP DMX adapters provide the highest data-rates, longest
distance, and most reliable signal in the industry.
SNAP DMX devices are available in two models:
‣
LP510-001 – DMXpro model at up to 2 Mbps
wireless data rate
‣
LP511-001 – DMXpro model for Europe (conforms
to European power transmission standards)
You can easily configure your SNAP DMX adapters using
the single button, labeled “Mode”.
Key Features of SNAP DMX
‣
Automatically operates as either the transmitter or receiver
‣
Flexible Terminal Block connector allows use of previously purchased high-quality
cables so it doesn’t matter whether you need three pin, five pin, male or female
connectors
‣
Features SNAP® — the Synapse Network Application Protocol — instant-on, self-
healing, mesh network operating system
‣
Sends and receives DMX wirelessly; replaces the DMX cable that is traditionally
used
‣
Supports RDM
‣
Performs mesh hopping, which can extend distances across many miles
‣
Requires no changes to existing DMX equipment or software